A Bradford company - serving Boulder City, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Mighty Buildings · Boulder City

Mighty Buildings Windows & Doors in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A garage converted into a guest room and home office
A finished backyard cottage with a small covered porch
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Windows & Doors: The Boulder City Owner’s Guide

We install and replace Mighty Buildings-compatible windows and doors for Boulder City homeowners, and typical installed pricing runs $4,500 – $15,000 for a standard window package and $8,000 – $25,000 for high-impact glazing suited to desert wind and sun. Door swaps and single-unit replacements sit at the low end; whole-wall glazing packages land at the top. We’re an independent remodeling contractor, not affiliated with Mighty Buildings, and we quote the work in writing before anything gets ordered.

Call (844) 797-9259

Owners usually find the problem on the same short list of symptoms: a window that won’t latch flush when the afternoon wind picks up, condensation trapped between panes on a cold January morning, or a patio slider that suddenly needs two hands and a shoulder. Boulder City sits at roughly 2,500 feet with punishing summer UV and spring gusts funneling off the McCullough Range, and glazing on any prefab home here takes that load for years before it complains.

Which Mighty Buildings Models This Applies To

A single-story rear room addition with tall windows and a new patio

Mighty Buildings built its name on panelized and 3D-printed units, and the window and door openings on those homes follow the panel grid rather than a traditional stick-framed rough opening. That matters more than the brand label on the glass. Sizing is set by the rough opening in the panel, not by the visible sash, and a replacement that fits the old frame can still sit wrong if the panel itself has shifted or the flashing detail has aged out.

To identify the right unit, start with the data plate inside the home and the label on the window frame, usually tucked in the head jamb or the sash edge. Note the width, height, and the callout stamped on the spacer. If the label is gone, we measure the rough opening and the panel seam rather than trusting the old sash dimension. On the OEM-versus-aftermarket question: Mighty Buildings-specific extrusions and printed-panel returns aren’t something you’ll find at a box store, so a direct-fit OEM unit is the cleaner path where the panel detail is unusual. Where the opening is standard, a quality aftermarket unit from a documented manufacturer (we install Therma-Tru doors, for example) is a defensible choice, provided the flashing and sill pan are rebuilt to match the panel.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Windows & Doors Is Failing

Some of these are cosmetic, some are structural, and a couple point to water getting where it shouldn’t. Here’s what we see when we open up a unit in Boulder City.

  • Fogging or haze between the panes. The seal on the insulated glass unit has failed and moisture has entered the cavity. Once that happens the glass can’t be dried out; the unit gets replaced, not cleaned.
  • Drafts at the frame or sill. Usually a failed weatherstrip, a shrunken gasket, or gaps where the panel-to-frame seal has opened up. Left alone, the same gap lets in dust and rain-driven grit.
  • A slider or casement that drags or won’t latch. The roller or hinge has worn, or the frame has racked slightly. On a panelized home, a dragging slider can also point to movement at the panel seam.
  • Water staining or soft wood at the sill. Flashing has failed and water is sitting where it shouldn’t. This is the one to take seriously; it’s the failure that quietly rots the substrate behind the frame.
  • UV damage and chalky seals on south and west faces. Southern Nevada sun cooks exterior sealant faster than most of the country. A seal that looks fine on the shaded side can be cracked and pulling away on the sunny one.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A room opened to the studs with new wiring and plumbing

Here’s an honest Boulder City range. The number depends on unit count, glazing type, and whether we’re resetting flashing at the panel seams.

  • Window Replacement (standard package): $4,500 – $15,000
  • Impact Window Installation (wind-rated glazing): $8,000 – $25,000
  • Single door or slider replacement: quoted within the window range above, sized to the opening

What drives the spread: the number of openings, whether the rough opening needs reframing, the glazing spec (single, insulated, or impact-rated), and how much of the flashing and sill detail we have to rebuild at the panel seam. What’s included is the removal and disposal of the old unit, the new unit, sealed flashing and sill pan, and finish trim. The price you get in writing before work starts is the price, with no repricing at the door.

Every window and door we install is covered by our 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we come back and correct it at no charge. You get that guarantee signed, in your hand, at close, along with a clean site.

DIY or Call Us?

Windows and doors aren’t in the same danger class as gas lines or high-tension springs, so a careful owner can safely do some of this. You can check the frame label, measure the rough opening, watch for daylight at the seams, and test the latch and roller action. That’s diagnosis.

What goes wrong with DIY is the install, not the inspection. A window set into a panelized home without the right sill pan and flashing lets in water that shows up months later as rot, and resetting a slider on a shifted panel is a structural call, not a shim-and-scrap one. We pull the flashing and sill detail apart, rebuild it correctly, and back it with the written guarantee. If something on that list above applies to your place, call (844) 797-9259 and we’ll come look.

FAQs

A framer checking new wall framing on a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch