







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling in Boulder City: The Owner’s Guide
We install Mr-Glass-compatible bathroom remodeling in Boulder City, and a full bathroom remodel typically runs $9,000 – $28,000 installed, with smaller projects landing between $5,000 and $12,000. We don’t offer same-day service on a remodel, and no honest contractor should promise one – this is planned construction with permits, demo, substrate work, and tile, so expect a scheduled start rather than a same-day dispatch. Most owners call us after they notice a soft spot under a Mr-Glass shower pan, caulk that keeps reopening along the base, or a valve that no longer holds temperature the way it did a year ago. Those are the first signs the assembly is moving behind the surface, and they’re worth pricing before the water finds your subfloor.
Key takeaways: A Mr-Glass bathroom remodel in Boulder City runs $9,000 – $28,000 installed. Small baths come in at $5,000 – $12,000. We give you a written price before any work starts, and every completed project carries the 365-Day Done Right Promise – if the work fails within that year, we return and correct it at no charge.
Which Mr-Glass Models This Applies To

Mr-Glass builds modular shower and tub-surround systems sold under several series names, and the part you need depends on which series and which generation you have. Before anything gets ordered, we identify your unit three ways: the model label, which is usually taped inside the access panel or on the back of the shower wall panel; the drain centerline measurement, taken from the finished wall to the center of the drain; and the base dimensions measured wall to wall at the floor. Those three numbers catch the most common compatibility mistake – a base that looks identical to a newer series but sits a quarter-inch off on the drain centerline, which forces either a new rough-in or the wrong pan.
On the OEM versus aftermarket question, we’re direct about it: for drain assemblies, valves, and sealing gaskets, a quality aftermarket equivalent from a name-brand maker is often the smarter buy because it’s serviceable and available, while structural panels and bases are best matched to the original Mr-Glass spec. We also service KraftMaid, Cambria, and Silestone components that often go in during the same remodel. Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Mr-Glass – we work with the product, not for the brand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
- Caulk that reopens along the shower base within weeks. Movement in the pan or a compromised gasket is flexing the joint open. Fresh caulk masks it for a season, then it splits again.
- A soft or spongy spot in the floor near the drain. Water is getting past the drain seal and soaking the substrate underneath. In Boulder City’s dry heat, that trapped moisture often goes unnoticed until the subfloor softens.
- Water pooling in the base instead of draining. A pre-slope that was never set right, or a drain assembly that’s partially clogged or misaligned, keeps water standing against the pan.
- Temperature that won’t hold, or a valve that’s stiff. The cartridge inside the mixing valve has worn or scaled. This is a replaceable part, but the valve body behind it can also be the culprit.
- Discolored grout lines or efflorescence at the base corners. Mineral deposits from slow, persistent weeping. It’s the earliest visible sign that a seal has already failed behind the tile.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City, a full Mr-Glass bathroom remodel runs $9,000 – $28,000 installed. A small bathroom remodel lands at $5,000 – $12,000. If you’re replacing the shower assembly itself, a shower replacement is $3,000 – $8,500, a walk-in shower installation is $4,500 – $12,000, and a tub-to-shower conversion is $3,500 – $10,000. A vanity swap alone runs $800 – $3,000.
What drives the range: whether the rough-in has to move, whether the substrate is sound or needs replacement, tile selection, and valve and trim upgrades. Every quote is a written line-item price before any work starts – parts and labor broken out, no numbers that move at the door. Overruns only happen with your signed approval on a written change order. The finished work is covered by the 365-Day Done Right Promise for a full year.
DIY or Call Us?
There’s a safe slice of this you can check yourself. You can look at the model label, measure your drain centerline and base dimensions, feel for soft spots along the floor, and re-caulk a cosmetic seam that’s just aged out. That’s the honest limit.
Where DIY goes wrong on a Mr-Glass system is behind the wall. Shower valves mean shutting off water at the main, and a misinstalled valve body can leak inside the wall for weeks before it shows. Setting a new pan or base means getting the pre-slope and drain seal right the first time – get it wrong and you’re replacing the subfloor a year later. That’s the point where a background-checked, uniformed technician on a written scope is worth the call. Phone lines are answered by a live person 24/7. Call (844) 797-9259 to schedule your free estimate – we’ll price the part and the install in writing before anything is ordered.
FAQs

A well-installed Mr-Glass shower assembly typically holds up 15 to 20 years before major service, but gaskets, cartridges, and caulk joints need attention every 5 to 8 years. Boulder City’s low humidity and intense sun help exterior surfaces but do nothing for trapped moisture behind a shower wall – that’s where the real clock runs. Call (844) 797-9259 for a free estimate if yours is showing its age.
Sometimes yes. Valve cartridges, drain gaskets, and trim can often be swapped without tearing out tile, which keeps the job in the low hundreds to low thousands. Structural cracks in a base or panel usually can’t be repaired reliably and need replacement. We’ll tell you which situation you’re in after we look. Call (844) 797-9259 for a written assessment.
A cartridge or drain assembly swap is typically a half-day to a full day. A full shower replacement runs three to seven days depending on substrate condition and tile. We schedule the work, pull the permits where required, and leave the site clean and documented at close. Call (844) 797-9259 to get your timeline in writing.
We identify your exact model and generation first, then source either the OEM component or a documented quality equivalent from a name-brand maker – whichever gives you a serviceable, warrantied part. We don’t claim to stock parts or carry them on a truck; every part is ordered to your unit. Call (844) 797-9259 to start the match.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












