







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Boulder City Owner’s Guide
Quick answer: A PGT-spec paver or hardscape surface installation in Boulder City runs $7,000 – $18,000 for a full driveway and $3,500 – $11,000 for a patio, and we can typically have a technician out within a few days to measure and quote. PGT-licensed hardscape profiles are still installed here, and when a piece fails it usually shows up the same way: a lifted corner, a hairline crack that widens after one summer, or a paver that rocks underfoot when you walk across it after a monsoon.
We’re Bradford Remodeling Boulder City, an independent local contractor and not affiliated with PGT. We install and replace PGT-compatible hardscape materials and can match the specification on your existing plan set or a sample from the failed piece. Below is what we’ve learned about how PGT hardscape actually behaves in Boulder City’s climate, what fails first, and what the numbers look like before anybody shows up with a truck.
Which PGT Models This Applies To

PGT has supplied pavers and hardscape profile systems through regional programs, and the model line is usually printed on a stamp on the back of the paver or on the plan set the original builder filed. Look for an embossed PGT mark and a numeric code on the underside of a loose or lifted piece: that code tells you which series you have, which determines thickness, edge profile, and joint sand spec. If the stamp is worn off, measure the paver footprint and the nominal thickness. A common Boulder City gotcha: the desert-rated pavers are often a full 1/4-inch thicker than the same-profile interior-grade line, and a replacement that doesn’t match thickness will never sit flush against neighboring pavers no matter how well it’s bedded.
The OEM-versus-aftermarket call for PGT is straightforward. OEM replacement pavers preserve the exact color, texture, and dimensional match, which matters on a driveway where the fade pattern changes over time. Quality aftermarket equivalents from brands like Belgard or Unilock are often available faster and cost 10 – 20% less, but only if the color run is a close match. We measure against a sample before quoting so you’re not disappointed by a dye lot that doesn’t blend.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
- A paver lifts at one corner. Usually a shifting base or a root swelling under the bedding sand. Left alone, the lift spreads crack paths to the adjacent course within a season.
- Hairline cracks that widen. Thermal cycling on a Boulder City driveway is brutal – 40-degree swings between day and night in spring and fall. A crack that widens after one summer is telling you the bedding failed.
- Joint sand washing out after rain. Boulder City’s monsoon downpours are short and violent. If the joint sand disappears seasonally, water is running under the pavers, not off them.
- Pavers rocking underfoot. A paver that moves when you step on it has a broken or missing bedding layer underneath. This is the failure that leads to edge chipping and joint splitting.
- Efflorescence you can’t wash off. A white mineral haze that returns after every rain means moisture is migrating through the paver from below – a sign the drainage plane has failed, not a stain you can scrub out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Paver driveway installation in Boulder City runs $7,000 – $18,000 for a standard two-car driveway, and a paver patio installation runs $3,500 – $11,000. Driveway replacement (pulling out old pavers or concrete and starting fresh) runs $5,000 – $14,000. Concrete driveway installation runs $4,500 – $12,000, and asphalt driveway paving runs $3,500 – $9,000. Driveway sealing as a standalone job runs $250 – $700. The range within each tier is driven by square footage, base prep depth, edge restraints, and whether the subgrade needs re-compaction.
What’s included in our written quote: removal of failed pavers, base inspection, replacement bedding material, new joint sand, edge restraints, and the paver installation itself. The 365-Day Done Right Promise covers the work for a full year – if a paver lifts, cracks on a joint, or the joint sand washes out within twelve months of completion, we come back and make it right at no charge. We also install Belgard, Unilock, and concrete hardscape when you’re open to alternatives.
DIY or Call Us?
You can safely do three things: pull a sample paver to read the PGT code, photograph the failed section for us, and sweep joint sand back into place between storms. That’s the honest limit. What goes wrong on DIY: a homeowner replaces one paver and discovers the base was compacted to the wrong spec, then the replacement fails within weeks because it was bedded on sand that shifts under winter rain. Re-bedding a paver requires understanding what’s under it, and that means lifting enough of the course to see the subgrade – a job that gets worse before it gets better if you guess.
If your PGT hardscape is showing the failures above, call (844) 797-9259 and we’ll schedule a free measurement and written estimate before any work starts.
FAQs

How long does PGT driveway hardscape last in Boulder City? Eight to fifteen years is typical for a properly bedded paver driveway here, shorter if the subgrade wasn’t compacted correctly at installation. The dry desert heat and monsoon cycles are the two forces working against it.
Can the failed paver be repaired instead of replaced? Often yes, if the failure is isolated to one or two pieces and the base underneath is sound. A full replacement only makes sense when the failure pattern spans multiple courses or the subgrade has moved. We check the base before quoting either way.
How long does the swap take? A single-paver repair is done in a few hours. A partial section replacement is one to two days. A full driveway installation is five to eight working days, weather permitting.
How do you source the replacement part? We source OEM PGT-compatible material through regional hardscape suppliers, and when it’s not available, we match the closest aftermarket equivalent from Belgard or Unilock against a physical sample. We don’t carry parts on a truck; we order against your specific code and thickness, which avoids the color and fit mismatches that cause callback failures.
We also work with KraftMaid, Cambria, and Silestone on the hardscape-to-finish side of the home, so the driveway, entry, and patio all read as one surface. Call (844) 797-9259 for a free estimate and a written price before anything starts.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












