







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Bathroom Remodeling: The Boulder City Owner’s Guide
We install Plant Prefab-compatible bathroom remodeling in Boulder City, with full bathroom projects typically running $9,000 – $28,000 and smaller scope work like a vanity or shower component landing well below that. Every price is written and fixed before tools come out. Most owners don’t discover a problem with their Plant Prefab bathroom until a seam opens at the shower pan, a vanity cabinet starts pulling from the wall, or water shows up where it shouldn’t. In Boulder City, that call usually comes in the spring, after a winter of wide temperature swings and dry desert air have worked on caulk lines and finish joints.
We’re an independent remodeling contractor. Bradford Remodeling Boulder City is not affiliated with Plant Prefab, and we don’t claim to be. What we do is take the module as built and bring the wet-side finishes, casework, and fixtures up to a standard that holds in Southern Nevada.
Key Takeaways
- Full Plant Prefab bathroom remodel in Boulder City: $9,000 – $28,000 installed.
- Written price before work starts, fixed, no change orders at the door.
- 365-Day Done Right Promise on every completed project.
- Our technicians have up to 22 years of experience.
- Live person answers the phone 24/7 at (844) 797-9259.
Which Plant Prefab Models This Applies To

Plant Prefab builds to more than one system, and the bathroom assemblies don’t share a common wall cavity or rough-in layout across lines. The component lines and panelized systems they produce can differ in stud spacing, plumbing wall depth, and the way the shower pan ties to the subfloor. Before any part gets ordered, we confirm what you actually have: the build label on the module, the data plate if one is present, and physical measurements taken at the rough opening, the drain centerline, and the fixture spread.
That last measurement is where most owners get tripped up. Drain centerline offset on a prefab pan can vary by an inch or more between builds, and a pan that’s close but not exact will leak at the flange no matter how well it’s set. We measure before we order.
On the OEM-versus-aftermarket question: for structural connections and waterproofing components, we use parts matched to the original spec, because a warranty dispute over a substituted pan or membrane isn’t worth the savings. For fixtures, valves, and finishes, quality aftermarket equivalents from documented brands work fine and often hold up better. We spec Kohler and Moen fixtures when the original is discontinued. For casework, KraftMaid and Wellborn cabinetry, and Cambria or Silestone surfaces, are on our documented brand roster. Every specification is traceable, which matters if you ever sell the home or file a claim.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Bathroom Remodeling Is Failing
In Boulder City the failure pattern is consistent. Dry air pulls moisture out of caulk and grout through the winter, then summer heat cycles the materials back. Here’s what we see, and what’s actually behind it.
- Caulk lines cracking at the shower pan or tub surround. The sealant has dried and lost adhesion from the seasonal swing between desert-dry winter air and summer heat. Left alone, water gets behind the surround and into the wall cavity.
- Grout haze or dark lines at the shower floor. Water is wicking under the tile and the pan membrane may be compromised. This one tends to show up before visible leaking does, which is why it’s worth catching early.
- Vanity cabinet separating from the wall or floor. Anchors worked loose, or the cabinet wasn’t shimmed and fastened to hold in a prefab wall cavity. On a Plant Prefab assembly, the fastening points aren’t always where a standard cabinet installer expects them.
- Soft or spongy floor near the toilet or shower. Moisture has reached the subfloor around the flange or drain. This is the one that turns a fixture swap into a floor repair, and it’s the most common reason a small job grows.
- Doors and drawers that bind or drag. Humidity swings and settling have pushed the cabinet out of square, or the hinges have given out on hardware that wasn’t rated for the climate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for a Plant Prefab bathroom project in Boulder City, broken out by scope:
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: whether the drain has to move, whether the subfloor is sound, fixture and surface grade, and how much tile work is involved. A vanity swap in Boulder City sits near the bottom of the range; a full remodel with a relocated shower sits near the top.
Every job gets a written line-item price before work begins. That price doesn’t move at the door. Parts and labor are listed separately so you can see exactly what the component cost and what the install cost. All completed work carries the 365-Day Done Right Promise: if the work fails inside that full year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely check a few things: look for cracked caulk at the pan and surround, press on the floor around the toilet and shower drain for soft spots, open the vanity doors and check whether the cabinet is pulling from the wall, and note whether grout lines at the shower floor are dark or hazy. Photograph what you find. That’s diagnosis, not repair, and it’s useful.
Where DIY goes wrong on a prefab bathroom: opening the shower pan or wall to find the source of a leak, resetting a drain flange, or pulling a vanity that’s tied into the plumbing wall. Once you’re inside the wall, you need to know how the assembly is built to put it back watertight. A mistake there means water behind the wall, and that’s a much larger repair than the one you started with.
If your check turns up a soft floor, a leaking pan, or a cabinet separating from the wall, that’s our call to make. Phone (844) 797-9259 and a live person picks up, around the clock.
FAQs

A properly installed Plant Prefab bathroom should hold 15 to 20 years on the wet-side finishes before a full refresh is needed, with caulk and grout lines needing attention every few years in Boulder City’s dry climate. The parts themselves last longer than the seals do. Recaulking on a 2-to-3-year cycle is what keeps a good install from turning into a floor repair.
Often, yes. Cracked caulk, failed grout, binding cabinet doors, and a loose vanity can usually be corrected without replacing the assembly, and that’s a fraction of the cost of a full remodel. The deciding factor is whether moisture has reached the subfloor or the wall cavity. If it’s surface-level, we repair. If it’s structural, replacing is the honest answer, and we’ll tell you which one you’re looking at in writing before any work starts.
A vanity installation in Boulder City is typically a day. A shower replacement runs two to four days depending on drying time for waterproofing. A full bathroom remodel runs one to three weeks. We give you the schedule in the written scope before we start, so you’re not guessing.
We measure the actual rough opening and drain offset first, then match to the original Plant Prefab specification, using OEM-equivalent components where structural or waterproofing integrity is on the line and documented aftermarket brands where they perform better or the original is discontinued. There’s no stock inventory and nothing carried on a truck. The part is ordered to your build, and the specification is in your written scope. Call (844) 797-9259 for a free estimate and we’ll walk through what your specific unit needs.
If you’re in Boulder City and your Plant Prefab bathroom is showing any of these signs, the sooner we look at it, the smaller the repair tends to be. Call Bradford Remodeling Boulder City at (844) 797-9259 to schedule your free estimate. We’ll put the price in writing, name every part on the scope, and back the completed work with the 365-Day Done Right Promise. A live person answers every time, day or night.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












