A Bradford company - serving Boulder City, NV
An open living room and dining area after a whole-home remodel
Sakrete · Boulder City

Sakrete Roofing in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A wide opening with a new beam where the kitchen wall was removed
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sakrete Roofing: The Boulder City Owner’s Guide

We install and repair Sakrete-compatible roofing in Boulder City, and most roof repair jobs here land between $400 and $1,800, with full roof replacement running $8,000 to $20,000 depending on pitch, square footage, and material. Sakrete is a mortar and concrete products brand, not a roofing manufacturer, so “Sakrete roofing” usually means the cement-based patching, bedding mortar, or flashing repair mortar tied to a tile or flat roof assembly, and that distinction matters a lot when something fails. Most Boulder City owners discover the problem the same way: a hairline crack in the mortar bed widens after a summer of 100-degree swings, a loose ridge tile lifts in a wind event, or a chalky white stain creeps down the wall below a parapet.

Call (844) 797-9259

Which Sakrete Models This Applies To

A remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Sakrete doesn’t publish a “roofing series” the way a window or cabinet line does. What you’ll find on a Boulder City roof is one of a few product families: Surface Bonding Cement, Type S or Type N mortar mix, Sand Mix, or a vinyl concrete patcher, each sold in 40 lb, 60 lb, or 80 lb bags. The bag label tells you the compressive strength and set time, and that label is what we ask you to photograph before we quote. A Type S mortar (roughly 1,800 psi) behaves very differently from a Type N (roughly 750 psi) when it’s bedding tile on a sloped roof, and matching the wrong one is the most common compatibility mistake we see.

On the OEM-versus-aftermarket question: there’s no such thing as a Sakrete “OEM replacement part,” because the product is a bagged material, not a component. What you’re really choosing is whether to re-bed with the same Sakrete specification or switch to a competing mortar. We generally stay with the spec called out on the original assembly, because changing mortar chemistry on an existing tile or flashing bed can create a bond failure between old and new material. We keep our sourcing documented so the specification stays traceable, and we’ll tell you plainly when a straight re-bed beats a full tear-off. The same discipline applies across the other brands we work with, from KraftMaid and Cambria to Silestone.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sakrete Roofing Is Failing

Mortar-based roof assemblies in Boulder City age differently than they do in wetter climates. Our dry heat cures mortar fast, and the daily temperature swing between a 105-degree afternoon and a 70-degree night works the material constantly. Here’s what failure looks like:

  • Hairline cracks across the mortar bed. Thermal cycling opens micro-fractures that let monsoon water in, and once water is behind the mortar, freeze-thaw isn’t required for damage; the next hot day pushes trapped moisture out and widens the crack.
  • Loose or hollow-sounding tiles. Tap a tile with a screwdriver handle. A dead thud means the bond has broken and the tile is sitting on the underlayment instead of the mortar, which is a water intrusion point waiting for the first hard rain.
  • White chalky staining on walls or fascia. That’s efflorescence, salts pushed out of curing or wet mortar. A little is normal on new work; persistent staining on an older roof means moisture is migrating through the bed.
  • Crumbling or sandy mortar at ridge and hip lines. Ridge caps take the most sun and the most wind, and a mortar that crumbles between your fingers has lost its binder.
  • Rust streaks or corrosion at flashing. Failed mortar bedding lets water reach the metal flashing underneath, and the rust you see on the surface is the tail end of a problem that started inside the assembly.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A finished backyard cottage with a small covered porch

Here’s what roof work tied to failed Sakrete bedding actually runs in Boulder City:

Scope Installed Price Range
Roof repair (re-bed tiles, patch mortar, flashing) $400 – $1,800
Tile roof repair (spot re-bed, cracked tile replacement) $600 – $2,500
Full roof replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000

The range is driven by roof pitch, how many tiles or squares are affected, whether the underlayment is still sound, and access. Steep pitches and two-story elevations cost more because they take longer and require more fall protection. We give you a written price before any work starts, itemized by material and labor, so you can see exactly what the Sakrete material, the tile, and the flashing each contribute. Every completed project carries the 365-Day Done Right Promise: a full-year written guarantee, and if the work fails inside that window we return and correct it at no charge.

DIY or Call Us?

Some things are safe to check yourself. You can inspect from the ground with binoculars, photograph the product label on any leftover bag, tap tiles you can reach safely from a ladder, and note where staining appears. What you shouldn’t do is climb onto a pitched tile roof, break out failed mortar, and re-bed tiles. Roof work is fall work, and a tile roof is slick, brittle underfoot, and easy to damage just by walking it wrong. Mixing and placing mortar at height adds weight and tool handling to an already risky position.

There’s also a materials trap: matching the right Sakrete product and the right water ratio on a hot Boulder City afternoon is harder than the bag suggests, and a batch that sets too fast or too weak fails within a season. If you’re seeing cracked bedding, loose tiles, or staining, call (844) 797-9259 and we’ll give you a written estimate before anyone goes up.

FAQs

A remodeled primary bathroom with a soaking tub and walk-in shower

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA small remodeled galley kitchen with cabinets to the ceilingA low-threshold walk-in shower with a bench and grab bar

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch