A Bradford company - serving Boulder City, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Boulder City

Schluter Bathroom Remodeling in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A garage converted into a guest room and home office
New painted shaker cabinets with an organized deep drawer
A remodeled staircase with wood treads and a slim metal railing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Bathroom Remodeling: The Boulder City Owner’s Guide

Schluter bathroom remodeling in Boulder City runs $9,000 – $28,000 for a full bath and $5,000 – $12,000 for a small one, with a walk-in shower alone at $4,500 – $12,000. When a Schluter system fails, the homeowner almost never sees it first. They see the symptom: a grout line near the drain that keeps turning dark no matter how often it’s scrubbed, a hollow knock under a shower floor tile, or a waterproofing membrane that has let go at a corner and started to lift. By the time a loose tile or a soft spot shows up, the substrate behind it has usually been wet for months, not days. That gap between when it fails and when it shows is the whole reason we quote Schluter work with a written scope that names the membrane, the drain flange and the substrate – not just “tile the shower.”

Call (844) 797-9259

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s bathroom work splits into a few product lines, and the part you need only fits the system it was made for. The bonded waterproofing membrane is KERDI, sold in rolls (commonly 3’3″ x 16’5″ and 3’3″ x 32’10”) and in pre-formed KERDI-BAND strips for seams and corners. The shower floor system is the KERDI-SHOWER line, and its drain assembly runs on the KERDI-DRAIN or the newer KERDI-LINE linear drain – the flange on these is sized to the drain body, so a replacement flange from the wrong series won’t seat. Uncoupling membrane is DITRA (the standard 1/8″ thick sheet) or DITRA-HEAT for radiant floor work, and the two are not interchangeable once the mat is bonded down.

Identify your part before you buy: read the print on the membrane edge (Schluter stamps the product name and roll size right on the fleece), check the drain body for its series marking, and measure the drain flange diameter, not the tile opening. The OEM-versus-aftermarket call matters here. Schluter’s own flanges and band are matched to the membrane’s fleece and its thin-set bonding spec; a generic membrane off a shelf may fit the same opening but won’t carry the same bonded-seam guarantee. We buy to the system, not to the opening size. Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Schluter.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Bathroom Remodeling Is Failing

  • Tile that sounds hollow underfoot. A dull knock instead of a solid tap means the thin-set has separated from the membrane or the membrane from the substrate. In Boulder City’s dry heat, a floor that gets wet daily and dries hard can unbond faster at the edges than the middle.
  • Grout that darkens and stays dark near the drain. That’s moisture trapped below the tile face, not on it. The membrane seam around the drain flange is the usual leak point because it’s where the most water moves and the hardest corner to band cleanly.
  • Lifting or curling membrane at a shower corner. KERDI-BAND that wasn’t properly embedded in thin-set will peel at the inside corner. Once a corner lifts, water gets behind the membrane instead of staying in front of it.
  • Efflorescence or white crust on grout and stone. Salt blooming out of the grout means water is moving through the assembly and evaporating at the surface. It’s the mineral signature of a slow leak, common on Boulder City’s harder water.
  • A soft or spongy spot in the shower floor. The substrate itself is wet. By this point the repair is a tear-out, not a patch, because the framing and backer board behind the membrane are already compromised.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

Installed pricing for the work that surrounds a Schluter repair depends on how far the failure spread. A full bathroom remodel in Boulder City runs $9,000 – $28,000; a small bathroom remodel, $5,000 – $12,000. Showers are the usual failure site, so the shower-only figures matter most: a walk-in shower installation is $4,500 – $12,000, a tub-to-shower conversion $3,500 – $10,000, and a straight shower replacement $3,000 – $8,500. A vanity swap, if the leak reached it, is $800 – $3,000.

What drives the range: whether the substrate is sound or has to come out, whether the drain is a center KERDI-DRAIN or a linear KERDI-LINE (linear drains cost more in both part and labor), and how much tile has to be matched or replaced. We quote parts and labor as separate line items so you see the membrane, drain and band cost apart from the install. Every completed project carries the 365-Day Done Right Promise – a written, full-year guarantee; if the work fails inside that window, we return and correct it at no charge. You get the written price before any work starts.

DIY or Call Us?

Some of this you can check safely. You can tap the floor for hollow spots, look for lifted membrane at corners, watch whether grout darkens after a shower, and read the product name stamped on the membrane edge so you know what you have. What goes wrong is the repair itself. Setting a KERDI drain flange or banding a shower corner correctly is a thin-set bonding job with almost no tolerance – the fleece has to embed fully or the seam fails again, often within a season. This isn’t spring-tension or live electrical work, so it won’t hurt you, but a bad bond means a second tear-out and a second bill. If the substrate is soft or the drain flange has let go, that’s the point to stop and call. Call (844) 797-9259 and we’ll walk the failure with you and give you a written price before anything starts.

FAQs

An open kitchen and dining area after a remodel

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A remodeled primary suite with built-in wardrobes and a window seatA small remodeled galley kitchen with cabinets to the ceilingA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinetsAn open living space after a whole-home remodelA finished backyard cottage with a small covered porch

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch