A Bradford company - serving Boulder City, NV
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Silestone · Boulder City

Silestone Home Additions & ADU in Boulder City, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Boulder City
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
A remodeled hall bathroom with subway tile and a floating vanity
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Silestone Home Additions & ADU: The Boulder City Owner’s Guide

We build Silestone-spec additions and ADUs (accessory dwelling units) in Boulder City, and the typical installed price for an addition runs $45,000 – $130,000, while a full ADU runs $90,000 – $220,000. These are planned builds, not same-day work – a real schedule, permits pulled, inspections passed. Most owners discover a problem with their Silestone surfaces and units in the same way: a hairline crack spreading across a countertop edge in the ADU kitchenette, or a sealant bead pulling away at the base of a new wet wall where the addition meets the original house. By the time they call, the small issue has usually been growing for a season.

Call (844) 797-9259

Key Takeaways

  • Additions run $45,000 – $130,000; full ADUs run $90,000 – $220,000 in Boulder City.
  • Silestone engineered quartz is not repairable like natural stone – cracks and chip-outs often mean replacement of the panel, not a patch.
  • We give you a written price before any work starts, and every project carries the 365-Day Done Right Promise.
  • Boulder City’s heat and hard water are genuinely hard on sealants and substrate – we spec for both.

Which Silestone Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Silestone is Cosentino’s engineered quartz line, and it’s used across a wide range of series – from the classic Nebula and River series to the newer Ethereal, Le Chic, and Loft collections. What matters for an addition or ADU isn’t the series name on its own; it’s the slab thickness and edge profile your original install specified. Standard Silestone slabs are 2 cm or 3 cm thick, and if you’re matching a countertop into an addition, matching the original thickness keeps the sightline clean where the new room meets the old. The model name on the installation paperwork usually appears on a fabricator’s tag or a Cosentino warranty card, and if you can’t find either, a photo of the slab edge next to a tape measure is enough for us to identify it.

Here’s the OEM-vs-aftermarket decision specific to Silestone: Silestone doesn’t sell replacement slabs to homeowners directly, so the “OEM part” is the genuine Cosentino slab from an authorized distributor, and the “aftermarket equivalent” is a compatible engineered quartz from another producer. We recommend the genuine slab when you’re matching an existing Silestone surface, because color batches shift slightly between production runs. We’ll source it and quote it in writing. We are an independent service provider, not affiliated with Silestone or Cosentino.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Silestone Home Additions & ADU Is Failing

  • Hairline cracks along an inside corner. Quartz is rigid, and a corner cantilevered without proper substrate support flexes under load until it cracks. This shows up first in ADU kitchenettes where the counter spans a short cabinet run.
  • Chip-outs at the sink or cooktop cutout. Those are stress points where the slab is thinnest. A dull blade during the original fabrication leaves micro-fractures that open up under thermal cycling.
  • Sealant pulling away at the wall or wet-wall junction. In Boulder City’s dry heat, sealant beads shrink and lose adhesion faster than in cooler, wetter climates. It’s not a Silestone failure – it’s a maintenance item most owners don’t know to check.
  • Discoloration or dullness in a sun-facing surface. Engineered quartz holds color well, but prolonged direct sun through an unshaded ADU window can fade the finish over years. A UV-blocking film on that window solves it.
  • Water staining or lifting near the base of a new wet wall. This usually points to substrate moisture from the addition’s plumbing rough-in, not the quartz itself. It needs to be traced before any surface is replaced.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Replacing a damaged Silestone counter in an addition or ADU runs $2,000 – $6,500 installed, depending on the length of the run, whether there’s a sink or cooktop cutout, and whether you need to match an existing color batch. A full countertop installation across a new ADU kitchen is $2,000 – $6,500, and an island adds $3,000 – $10,000 if it’s part of the scope. The range driver is slab size and cut complexity – a straight run with no cutouts sits at the low end; an L-shaped counter with a sink cutout and a matched edge profile sits higher. Parts and labor are both itemized in the written quote before we start. The 365-Day Done Right Promise covers the installation work for a full year: if the counter or the sealant fails within that window, we come back and correct it at no charge.

DIY or Call Us?

An owner can safely check a few things before calling. Look at the sealant bead where the counter meets the wall and the backsplash; if it’s cracked or pulling away, that’s a maintenance item you can flag. Check under the counter for staining on the cabinet finish, which points to a moisture problem worth tracing. What you shouldn’t do is try to remove or reset a Silestone slab yourself. Quartz is heavy, rigid, and unforgiving – a 3 cm slab can weigh well over a hundred pounds, and a dropped or improperly braced slab cracks clean through. It also needs to be cut with a wet saw for a clean edge, which is not a homeowner tool. If you’re seeing a crack, a chip, or a sealant problem, call (844) 797-9259 and we’ll take a look and give you a written price.

FAQs

A walk-in shower with large-format tile and a built-in niche

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioA freestanding soaking tub in a remodeled primary bathroomA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing rooflineA garage converted into a guest room and home officeA remodeled hall bathroom with patterned floor tile and painted walls

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Boulder City

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Boulder City team

A local vetted partner works across Boulder City and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-9259
Local Service Coverage

Request a Free Estimate in Boulder City

Tell us what you need - Bradford Remodeling Boulder City responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch