







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Roofing: The Boulder City Owner’s Guide
We install and repair Tamko roofing systems across Boulder City, and most shingle and low-slope repairs land between $400 and $1,800; a full roof replacement runs $8,000 to $20,000 depending on pitch, square count, and whether old layers come off. Tamko is a materials manufacturer, not an installer, so when we talk about “your Tamko roofing” we mean the shingles, underlayment, or low-slope membrane already on your house and the parts that keep it watertight.
Owners usually find the problem after a wind event or a hard summer, not during a routine look. A ridge cap lifts on the windward slope. Granules pile up in the gutter like coarse sand. A ceiling stain shows up in a back bedroom three days after rain. That’s the moment most people start searching for a part number, and it’s the moment we get the call.
Which Tamko Models This Applies To

Tamko’s residential line covers a wide spread, and the part you need depends on which one is on your roof. The common asphalt shingle families you’ll see on Boulder City homes are Heritage (the workhorse three-tab and architectural lines), Titan, and the laminated Heritage Premium lines; low-slope sections often carry Tamko’s modified bitumen or built-up membrane products. Each family uses a different starter strip, ridge cap, and hip-and-ridge profile, and those parts are not interchangeable between lines.
Identify what you have before ordering anything. Check the underside of a shingle tab at a gable edge or in the attic where the deck is exposed; many Tamko bundles carry a printed wrapper code and the shingle back stamps the manufacturer. Measure a full shingle: three-tab runs about 12 by 36 inches, architectural laminates run similar in footprint but thicker, and the exposed exposure differs, which changes how many pieces you need per course. Ridge and hip caps are sold by the linear foot and their profile has to match the field shingle or the transition leaks.
The OEM-versus-aftermarket call matters here. A genuine Tamko ridge cap matches the color lot and profile of your field shingles. Aftermarket caps are cheaper and often fine for a repair, but color drift between lots is real after a few Nevada summers, so match carefully on any visible slope. We can source either, and we’ll tell you which one the job actually needs rather than upselling the OEM part on a back slope nobody sees.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Roofing Is Failing
Roofing rarely fails all at once. It gives you signals, and reading them early is the difference between a $400 repair and a $12,000 replacement.
- Granule loss in the gutters and at downspout outlets. Granules are the shingle’s UV armor. When they wash off in visible amounts, the asphalt underneath is already sun-cooking, and Boulder City’s 300-plus days of high-altitude sun speeds that clock.
- Curling or clawing shingle edges. Tabs that lift at the corners have lost their seal-down strip. Once the sealant strip fails, wind gets under the shingle and peels it back course by course.
- Lifted or missing ridge and hip caps. The caps take the most wind on a sloped roof. A missing cap exposes the ridge vent or the deck joint, and that’s where water enters first.
- Dark water stains on ceiling or attic decking. A stain on the ceiling is the last step in a chain that started at a failed flashing or underlayment weeks earlier. By the time you see it inside, the leak path is established.
- Blisters or soft spots on low-slope sections. Modified bitumen and built-up membrane trap moisture between layers. A soft spot means the substrate under it may already be saturated and the fix is bigger than a patch.
Replacement Cost & What’s Included

Here’s the honest range for Boulder City. A localized repair to a Tamko shingle roof – replacing a section of field shingles, resecuring ridge caps, or redoing a vent flashing – runs $400 to $1,800. A tile roof repair, if you’ve got clay or concrete up there, runs $600 to $2,500. A full roof replacement with new underlayment and Tamko-compatible shingles runs $8,000 to $20,000; metal, if you’re weighing it, runs $15,000 to $40,000.
What moves the number: square footage, roof pitch and how many stories, how many old layers have to come off, and whether the decking underneath is sound. We give you a written price before any work starts, broken down by materials and labor so you can see the parts cost, the shingle cost, and the labor line separately. Every completed roof is covered by our 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. We’re an independent contractor and not affiliated with Tamko, so our guarantee is our own to stand behind.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Roof work puts you on a ladder, on a slope, at height, and that is the real hazard here – more than the parts themselves. A homeowner can safely do a ground-level inspection with binoculars, check the attic for staining and daylight, and clear debris from gutters and valleys. Those checks tell you whether you have a problem.
What we’d steer you away from: walking a steep pitch unroped to swap a ridge cap, prying up sealed shingles to patch a leak, or tearing into low-slope membrane hoping to find the wet spot. Sealed shingles tear when you lift them if you don’t know the trick, and a mis-sealed repair leaks worse than the original problem. If the roof is more than a single-story, low-pitch slope and the fix is beyond a visible cap, call us at (844) 797-9259 and we’ll tell you straight whether it’s a repair or a replacement.
FAQs

Expect roughly 20 to 30 years from a Tamko architectural shingle in Boulder City’s climate – the high-desert sun, summer heat that pushes attic temps past 140°F, and occasional monsoon wind all shorten the clock compared to a cooler market. The low end of that range is what we see when a roof gets no attic ventilation; the high end needs good venting and a sound deck. Call (844) 797-9259 for an exact quote on yours – estimates are free.
Often yes – a single failed ridge cap, a blown-out section of field shingles, or a leaking vent flashing can usually be repaired without touching the rest of the roof. A repair makes sense when the rest of the roof is still within its serviceable life and the failure is localized. If granules are gone across most of the surface, a repair just delays the replacement. We’ll tell you which one you’re looking at after a look. Call (844) 797-9259 to set up a free estimate.
A localized Tamko repair is typically a half-day to a full day, depending on access and how much has to come apart. A full roof replacement on a typical single-family home runs two to four days, weather permitting; pitch, square count, and how many old layers come off all stretch that. We give you the duration in writing with the price before we start. Call (844) 797-9259 to schedule your free estimate.
We identify your shingle line from the bundle wrapper code or the back stamp, then order the matching ridge cap, starter, or membrane profile from a supplier that stocks that line, and we confirm the color lot against your existing field shingles before installation. If the exact lot is gone, we’ll show you the closest current match and let you decide. We don’t carry stock parts on a truck and we don’t guess at a profile. Call (844) 797-9259 for a free estimate, and we’ll work through the sourcing with you.
Other Brands We Work With
Roofing is one part of what we handle. We also work with a documented roster of name-brand materials across the house, including KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures – every product traceable to a manufacturer spec and warranty that back the work we do.
Whether you’re facing a lifted ridge cap, a ceiling stain you can’t trace, or a roof that’s simply earned its retirement, the next step is a written price before anyone touches a tool. Call (844) 797-9259 to schedule your free estimate – a live person answers, and you’ll know exactly where you stand. Every job is backed by our 365-Day Done Right Promise and the Garrison Standard: the price and the guarantee in writing, before the first shingle comes off.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












