







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Bathroom Remodeling: The Boulder City Owner’s Guide
A bathroom remodel built around Therma-Tru components in Boulder City typically runs $9,000 – $28,000 installed, and every project we take on starts with a written price before a single tool comes out. That number covers door, framing, waterproofing, fixtures, tile and finish work together, not a parts swap in isolation. We install to the spec Therma-Tru publishes for each model line, and we schedule the work as a planned remodel rather than a same-day call.
Owners usually find the weak link the hard way. The bathroom door sticks in July. The bottom rail shows a dark line along the sill. A hinge leaf pulls loose from the jamb around the top screw. A Therma-Tru exterior door panel in a humid bathroom starts to delaminate at the edge where the slab meets the frame. In each case the part that failed points to a spec or installation problem underneath, and that is what a real remodel corrects.
Which Therma-Tru Models This Applies To

Therma-Tru door systems show up in Boulder City bathrooms in two common ways. The first is a Fiber-Classic or Smooth-Star exterior door leading out to a patio or pool deck, where the interior face sits in bathroom humidity. The second is an interior slab or prehung unit from the same lines used to replace an old hollow-core bathroom door. Profiles change by series and by year, so the model line matters more than the color name on the sticker.
To match the right part, find the Therma-Tru label on the top or hinge-side edge of the door slab, or on the jamb above the strike plate. It carries the series, the slab size (most bathroom doors are 2’0″ or 2’4″ wide, 6’8″ tall), and the handing (left or right swing). If the label is gone, measure the slab width, height and thickness; standard Therma-Tru slabs are 1-3/4″ thick, and a 1-3/8″ measurement tells you it is an interior slab and not an exterior system.
The OEM-versus-aftermarket decision is where most owners get stuck. Therma-Tru OEM hinges, sills, sweeps and weatherstrip match the series exactly, and aftermarket “universal” replacements often run a hair short on the sill or loose on the hinge spacing. In Boulder City heat, a sill that does not seat flush is the first thing to fail. We source OEM where the fit matters and aftermarket only where the spec is genuinely interchangeable. We are an independent remodeling contractor, not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Bathroom Remodeling Is Failing
- Door sticks or drags in summer. Wood framing and slab edges swell in low desert humidity swings, and that movement throws the door out of square. A hinge adjustment buys weeks, not years; the rough opening itself may be the problem.
- Dark line along the bottom rail or sill. Water is wicking into the slab core through a sill that was never properly sealed or flashed. Left alone, the core swells and the door will not close cleanly again.
- Loose hinge screws that will not hold. The jamb wood has stripped where the screws bite, usually because the original install did not use long enough screws into the framing. This is a structural gap, not a hardware failure.
- Peeling or bubbling at the door edge. Delamination at the stile or rail signals moisture reaching the core. Once the skin separates, no caulk or paint repairs it; the slab is done.
- Mold or soft spots near the shower and door threshold. Waterproofing behind the tile or under the floor failed, and the door is just the visible symptom. This is the point where a remodel, not a part, is the fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Bathroom remodeling in Boulder City runs $9,000 – $28,000 for the lead range on this page. Smaller bathrooms land in the $5,000 – $12,000 band, and a walk-in shower installation sits at $4,500 – $12,000 on its own. A tub-to-shower conversion typically runs $3,500 – $10,000, a shower replacement $3,000 – $8,500, and a vanity installation $800 – $3,000. If the failure is isolated to the door and jamb, we price that as a line item and put it in writing first.
What drives the range is what the failure reaches. A door and frame swap is the low end. A door that leaked into the subfloor pulls in tile, waterproofing, substrate and sometimes the vanity. Every one of those line items shows up in the written price, and we do not move numbers at the door. The 365-Day Done Right Promise covers every completed project for a full year: if the work fails inside that window, we return and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Look for the Therma-Tru label, measure the slab, take photos of the failing edge, and check whether the door is binding on the latch side or the hinge side. That information helps us price accurately on the first call.
Where DIY goes wrong is underneath the door. A damaged sill or a stripped hinge jamb means the rough opening, flashing and framing are involved, and a bathroom floor is the most moisture-exposed surface in the house. Getting the waterproofing wrong behind a shower wall or a door threshold turns a $2,000 door job into a $9,000 remodel within two seasons. For anything beyond an adjustment, the trained path is cheaper. Our technicians have up to 22 years of experience, and we answer the phone with a real person 24/7. Call (844) 797-9259 to schedule your free estimate.
FAQs

A properly installed Therma-Tru door in a Boulder City bathroom typically lasts 15 – 20 years; a poorly installed one fails in 3 – 5, usually at the sill or hinge jamb. Boulder City’s summer heat and dry air stress the door face and finish, and the winter humidity swings drive water into any unsealed edge. Most early failures we see trace back to a missed seal or a short screw, not the door itself.
Sometimes, yes. A sticking door, a sagging hinge or a worn weatherstrip is a repair, and we will say so plainly. A delaminated slab, a swollen sill or water-damaged framing is not repairable without replacement of the affected piece, and patching it is money spent twice. We tell you which one you have before any work starts, with a written price for each option.
A door and frame replacement is a one-day job for a single door. A bathroom remodel where the door failure has reached the floor, shower or vanity takes several days to a few weeks depending on scope, and we schedule it as a planned project rather than an emergency call. The written scope tells you exactly which days we are on site.
We source OEM Therma-Tru parts against the exact series and slab size on your label, and we source aftermarket only where the spec is genuinely interchangeable. If the model is discontinued, we identify the current replacement line from Therma-Tru and walk you through the fit before we order. We do not carry parts on a truck or stock them; every part is ordered to your spec, and the price is written down before the order goes in.
We work alongside other documented brands too, including KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures, so a whole-bathroom remodel holds together from door to countertop.
If your Therma-Tru bathroom door or frame is showing the signs above, get a written price before anything starts. Bradford Remodeling brings the Garrison Standard to every Boulder City bathroom: a price in writing, background-checked technicians on site, a live person answering the phone 24/7, and the 365-Day Done Right Promise on the finished work. Call (844) 797-9259 to schedule your free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












