







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Boulder City Owner’s Guide
If a Therma-Tru entry system has stopped opening cleanly and you suspect the exterior surface it sits against – the drive apron, the paver runway, the landing at the threshold – the fix is a reset or replacement of that surface, and in Boulder City it runs $7,000 – $18,000 installed for a full paver driveway, with smaller apron-and-threshold resets priced individually in a written quote before any work begins. Most owners don’t notice the surface first. They notice the door: a light drag at the bottom sweep, a sill plate that’s started to pitch, a gap at the corner where the frame meets the porch.
Which Therma-Tru Models This Applies To

Therma-Tru builds entry doors, sidelites, patio and French systems across several product lines – Fiber-Classic, Smooth-Star, Classic-Craft, and the Tru-Defense and American Style collections among them – and the surface work underneath them is going to matter most on the wider systems. A single 36-inch door with a couple of sidelites is forgiving of a slightly out-of-level apron. A double-door or three-panel French setup with a low sill is not; that configuration carries more weight across the threshold and punishes any settlement in the concrete or pavers below it.
Here’s how to identify what you actually have before anyone quotes a part. Open the door and look at the hinge jamb; the model and series label is typically on the jamb or the door edge, and the sill is stamped with the sill material code on most modern Therma-Tru units. Measure the rough opening, not the door slab – width, height, and the full sill depth including any exterior threshold extension. That last number is where most homeowners get burned, because a sill with an exterior extension needs its landing flush to a different plane than a standard sill. Bring those three measurements and a photo of the label and any contractor can match the surface work to the door instead of guessing.
On OEM-versus-aftermarket: Therma-Tru makes the door and the sill; it does not make pavers, concrete, or the base materials beneath them. So there is no “Therma-Tru part” in the traditional sense for the surface. What matters is matching the surface spec to the door’s sill height, drainage plane, and threshold material, and going with a paver line that has a published spec sheet. Bradford Remodeling works from a documented brand roster – Belgard and Unilock on the hardscape side, alongside KraftMaid, Cambria, and Silestone on the interiors – so every surface spec is traceable. Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Driveway & Pavers Is Failing
- The door drags or catches at the sweep. That’s almost always settlement in the apron or threshold landing beneath the sill. The door isn’t the problem; the surface it sits on has pitched downward and changed the clearance.
- Water pooling at the threshold after rain. Pavers or the concrete apron have lost their slope away from the house, so water sits against the sill and works into the frame. Boulder City’s summer monsoon pattern exposes this fast.
- Visible cracks radiating out from the apron edge. In Boulder City this is common: the desert sun bakes the slab, the soil beneath shifts, and the crack pattern starts at the corner where the driveway meets the walkway.
- Pavers lifting, rocking, or sinking underfoot. The base course has failed. Under the door threshold, that means the surface supporting the exterior sill is no longer stable.
- A gap between the sill plate and the landing. Even a quarter-inch void lets wind-driven dust and water in and lets the door frame flex. It also voids the weather seal on most Therma-Tru systems.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the surface work around a Therma-Tru entry system in Boulder City:
| Scope | Installed Price Range |
|---|---|
| Full paver driveway | $7,000 – $18,000 |
| Concrete driveway | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
| Paver patio (adjacent to entry) | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What drives the range: total square footage, base-course depth, drainage corrections, paver choice, and whether the existing surface has to be demolished and hauled. Every project gets a written price before work starts, itemized by material and labor, with no numbers that move at the door. All completed work is covered by the 365-Day Done Right Promise – a written guarantee that if the surface fails within a year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely check three things: shine a light under the sill plate to look for a gap, pour a bucket of water on the apron and watch which way it runs, and note any rocking pavers by stepping on each one. What an owner should not do is lift pavers or chip concrete to see what’s underneath. The base course and drainage plane are what make the whole assembly hold, and one weekend of hand-lifting pavers is how a small correction becomes a $7,000 – $18,000 full replacement. If the surface is tied to the structural support of a Therma-Tru door with a wide sill or French configuration, don’t touch it. Call (844) 797-9259 and we’ll look at it and give you a written price range at no charge.
FAQs

Ten to fifteen years for pavers under normal use, closer to seven to ten under the desert sun if the surface isn’t sealed. Boulder City’s summer heat cycles and limited rainfall that arrives all at once in monsoon season are harder on the base course and joint sand than a temperate climate would be. Sealing the driveway every two to three years extends that window meaningfully – sealing runs $250 – $700, far cheaper than a replacement. Call (844) 797-9259 for a written quote on your specific surface.
Sometimes. If the failure is joint sand loss, a couple of rocking pavers, or minor settlement in a small apron, a spot repair usually does it. If the base course has failed across more than a few square feet, or the slab has cracked through the apron under the door, replacement is the honest answer. We’ll tell you which one it is in writing. Estimates are free.
A paver apron or threshold landing reset is typically one to three days. A full driveway replacement is three to seven working days, depending on square footage and whether the existing surface needs demolition. We don’t promise same-day turnaround on planned surface work; the written scope lays out the schedule before anyone starts.
From documented manufacturers – Belgard and Unilock among the hardscape lines – so every material carries a manufacturer spec sheet and warranty that backs our own 365-Day Done Right Promise. No unmarked pavers, no substitutions without your written sign-off. Call (844) 797-9259 to schedule a free estimate on the surface work under your Therma-Tru door.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












