







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Boulder City Owner’s Guide
Tremron kitchen remodeling in a Boulder City home gives you the look of quarried stone, glass, or tumbled travertine without the quarry price tag, but the finish only holds when installation is squared away. Tremron is a paver and hardscape manufacturer, not a kitchen surface line, so this guide is written for the homeowner whose kitchen remodel uses Tremron-format tile inside: a tiled kitchen floor, a stone-look backsplash, a finished island face. A full kitchen remodel with that work runs $14,000 – $45,000 in Boulder City, and a tight scope of finish work is quoted in writing before we start. Call (844) 797-9259 and we’ll tell you straight what we can do for your scope.
How owners usually find out something is wrong: grout lines crack along the floor perimeter in the first dry summer, a tile lifts under the toe kick with a hollow sound, or the caulk joint at the wall stops moving with the house and splits open. In a 100-plus-degree Henderson-adjacent summer, that third one is the one we see most. Which is why we say plainly up front: Bradford Remodeling is an independent contractor and not affiliated with Tremron.
Key Takeaways
- Tremron makes pavers and hardscape stone. Your kitchen’s tile or stone surface is the application, and the substrate is the part that actually fails.
- Every price is written before work starts, every project carries the 365-Day Done Right Promise, and a real person answers (844) 797-9259 around the clock.
- Our technicians have up to 22 years of experience, and we work with a documented roster of name-brand materials.
Which Tremron Models This Applies To

Tremron’s product lines run a few families you’ll recognize on sight once you know what to look for. The Olde Towne and Granite Pavers are the interlocking paver lines, sold mainly for driveways and patios. The Tremron landscape tile families include stone-look and glass-look formats that get used indoors on floors and backsplashes. Before we quote a repair or a finish, we identify the format by measuring a single tile face and thickness in millimeters and reading the lot code off the end of the box, then checking that code against the spec sheet.
Here’s the compatibility gotcha most homeowners miss. Tremron paver formats are nominal sizes, and a 12×12 face on the box is often a fractional measurement in the field. When a vendor tells you the replacement piece is “the same size,” ask for a measured tolerance, not a nominal callout. That mismatch is what produces the lip and the grout joint that never quite lines up.
On the OEM-versus-aftermarket question: Tremron’s own material should always be the first call for anything visible. Where the failed part is underfoot, like the mortar bed or a membrane, a quality underlayment substitute rated for the same load and flex is fine and usually the smarter answer. We’ll tell you which is which on your Boulder City job rather than guess.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Kitchen Remodeling Is Failing
Your kitchen’s Tremron-format surface and its underlying layers fail in predictable ways. Five you’ll recognize:
- Cracks that run straight along a grout line. Usually a substrate movement issue, not a bad batch of grout. In our soil and heat cycles, the slab under the tile and the tile on top expand at different rates and the joint takes the whole load.
- A hollow, drum-like sound when you tap a tile with a coin. That’s a bonding failure, called debonding, and it means the thinset never fully adhered. Tapping the same tile over time and hearing the hollow spread is your warning sign.
- A raised or lifting tile near the toe kick or a sunny doorway. Heat and moisture reach the edge of the field first, and it’s the most common place a floor layer gives up.
- Grout that crumbles or stains dark even after cleaning. Often a sign of moisture moving somewhere it shouldn’t, whether behind the wall tile or under a floor, and it won’t stop on its own.
- Wall tile pulling away above a countertop or backsplash. A bad adhesive and a bad wall substrate do this, and it can get worse with heat and vibration during a normal use day.
Tap test first. It costs nothing, and it tells us a lot before the first tool comes out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for Tremron-format tile work in a kitchen, calibrated to the Boulder City market, runs like this:
| Scope | Installed Price |
|---|---|
| Kitchen remodel (Tremron tile in the mix) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the range: tile size and pattern, whether we’re setting over the existing substrate or rebuilding it, and whether the floor plan is simple or has angles and cuts. The substrate is the part that matters most, and it’s the part most quotes leave out.
Every Bradford kitchen project comes with a written price before any work starts, a documented scope, and the 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge. That’s the guarantee, in writing, before a single tile is set.
DIY or Call Us?
Honest split. You can safely tap-test, photograph, and measure a tile, read the lot code off the box, and check for movement at a wall joint. What you shouldn’t do yourself is demo a bonded field of stone-look tile over a slab without knowing the substrate, or reset a floating wall tile. A wrong substrate prep here means the new layer fails at a lower temperature next summer, and water behind a wall escapes where you can’t see it.
We work with a documented brand roster outside Tremron too, including KraftMaid, Cambria, and Silestone surfaces, so the kitchen finishes stay consistent. Every technician is background-checked and uniformed, and you know who’s in your home before the crew arrives. If you’re not sure whether your Boulder City tile is a repair or a full redo, call us. (844) 797-9259 connects to a live person, any hour.
FAQs

A well-installed Tremron-format tile floor should last 15 years or more in a kitchen, and a failed one usually shows its first cracks in the first two summers. The tile itself is durable; the failure is almost always the substrate or the adhesive, not the stone. Call (844) 797-9259 for a free assessment.
Sometimes yes. A single debonded tile can often be cut out and reset, but if the hollow sound spans more than a few tiles, replacing only the surface is a wasted layer. We’ll tap-test the field and give you a written call on repair versus replace. Call (844) 797-9259.
A single-tile or small-backsplash repair is typically a one-day job. A full floor or backsplash reset runs longer depending on dry time for mortar and grout. Your written date range comes in the quote. Call (844) 797-9259 for a free estimate.
We match the format from the box lot code, or if it’s lost, from a measured face and thickness, and we’ll tell you when a quality underlayment or matching tile is the smarter call than chasing a discontinued color. Independent contractor here, not affiliated with Tremron. Call (844) 797-9259 to schedule your free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












