







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Boulder City Owner’s Guide
Tremron doesn’t manufacture roofing, and that’s the first thing to get straight. Tremron is a hardscape and masonry brand – pavers, retaining wall block, and related products – so if a roofer quoted you a “Tremron roof” or a “Tremron part,” the term is being used loosely. What you’re almost certainly dealing with is a tile or paver-profile roof component sourced or installed by a contractor who also handles Tremron hardscape, and the part that failed is the roofing material itself – not a proprietary Tremron roof fitting.
We install and repair tile and paver-profile roofing in Boulder City, and the typical installed range for a full roof replacement runs $8,000 to $20,000; a targeted repair runs $400 to $1,800. Most Boulder City homeowners discover the problem the same way: a ceiling stain after monsoon season, a tile that slid out of line, or flashing that lifted in a windstorm. We’re an independent service provider and not affiliated with Tremron. If your roofer used the brand name as shorthand, we’ll sort out what you actually have before we quote anything.
Which Tremron Models This Applies To

Here’s the compatibility catch that trips people up. Tremron’s product lines – Brighton, Olde Towne, and the paver and wall systems – have specific nominal dimensions, and a roofer who crosses a Tremron paver spec onto a roofing profile gets the wrong part. A 60mm paver isn’t a roof tile. Before you order anything, measure the existing piece: length, width, thickness, and the overlap or head-lap. That measurement – not the brand name on a satchel – is what identifies the correct replacement.
On the roof itself, check for a stamp, a manufacturer mark on the underside, or match the profile against a sample you bring down. If you have a single loose tile or cap, that’s your reference piece. For the OEM-versus-aftermarket call: on tile and paver-profile roofing, a color-matched aftermarket piece from a reputable producer is usually the practical choice because exact dye-lot matches fade differently in Nevada sun anyway. Bring us the sample and we’ll confirm the match before ordering. We also service KraftMaid, Cambria, and Silestone on the interior side, so if your project runs inside and out, one crew covers it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Roofing Is Failing
- Hairline cracks across the face of a tile. Thermal cycling – Boulder City swings from cold desert nights to 100°F afternoons – stresses glazed tile and opens cracks that let water past the surface into the underlayment.
- Tiles that have slid or lifted out of line. Usually a failed fastener or a broken mechanical attachment, not just settling. Once one tile moves, wind gets under the next and the problem spreads across the field.
- Rusted or exposed flashing at valleys, chimneys, and penetrations. Flashing fails before the tile does. A rusted valley pan or lifted step flashing is the most common source of the ceiling stain you’re seeing.
- Granule loss or bald patches below downspouts. If you’re sweeping grit off the driveway after every rain, the surface is breaking down and the tile is past its serviceable life.
- Daylight or water in the attic after a storm. That points to underlayment failure – the felt or membrane under the tile has given out even if the tile itself looks intact.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City, a full roof replacement lands $8,000 to $20,000. A repair – resetting tile, replacing flashing, patching a localized section – runs $400 to $1,800. A repair that involves tearing out and rebuilding a tile section with new underlayment typically falls in the $600 to $2,500 range when it’s more than a single-piece fix.
What moves the number: roof pitch and access, how much underlayment needs replacing, whether flashing is salvageable, and the tile profile and color match. What’s included is a written, line-item price before any work begins – the part, the labor, the tear-off, the disposal, and the underlayment, each on its own line. Nothing moves at the door. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge. That guarantee is written and in your hand at close, along with a clean site and a signed scope.
DIY or Call Us?
Walking the roof to look, photograph, and measure is fine if you’re steady on your feet and the pitch is gentle. Bring down a loose tile or cap as a sample; that’s the single most useful thing you can do before calling. What we’d steer you away from: pulling tile and flashing on a steep pitch yourself, or chasing a leak from the attic side without knowing where the water is actually entering. Roof work at height is the part where people get hurt, and a wrong repair reopens the same leak by the next storm.
If you’ve got daylight in the attic or water tracking down a wall, that’s a call, not a weekend project. We’ll come look, tell you whether it’s a $400 fix or a full replacement in the $8,000 to $20,000 range, and put the number in writing. Call (844) 797-9259 to schedule your free estimate. A live person answers, day or night.
FAQs

Expect roughly 25 to 40 years from a quality tile roof, but the underlayment beneath it is the real clock – 15 to 20 years in Nevada’s sun before it dries and cracks, which is why many “failed” roofs are actually failed underlayment under sound tile. Have the underlayment age checked before assuming the whole roof is gone. Call (844) 797-9259 for an exact quote – estimates are free.
Often yes. A localized leak, a handful of cracked or slid tiles, or failed flashing can usually be repaired for $400 to $1,800 rather than replaced. The deciding factor is underlayment condition and how far the damage has spread – we’ll tell you straight which one you’re looking at. Call (844) 797-9259 for an exact quote – estimates are free.
A single-part repair is usually a half-day to a full day; a full roof replacement on a typical Boulder City home runs two to four days depending on pitch, access, and weather. We give you the schedule in writing up front so you know what to expect. Call (844) 797-9259 for an exact quote – estimates are free.
From your existing sample – we measure the profile and thickness, confirm the match, and order from a producer whose spec and warranty are documented. We don’t claim to stock parts or carry inventory on a truck; every part is ordered to your roof. That’s how the match and the guarantee stay traceable. Call (844) 797-9259 for an exact quote – estimates are free.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












