







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Windows & Doors: The Boulder City Owner’s Guide
Tremron-compatible window and door replacement in Boulder City runs $4,500 – $15,000 for standard window replacement and $8,000 – $25,000 for impact-rated installation, and most windows and doors we install are completed in a single day once the units are on site. We’re an independent service provider, not affiliated with Tremron. Most owners discover the failure the same way: a window that used to close with a firm pull now needs a shoulder, or a sliding door tracks grit in a channel that used to run clean. In Boulder City, that often shows up after the first hard wind season, when desert dust has worked into the rollers and weatherstripping and the frame has taken a summer of 105-degree afternoons.
Which Tremron Models This Applies To

Tremron’s window and door lines break down by frame material (vinyl, aluminum, composite) and by series, and the series is what determines your replacement part dimensions. The label is usually on the inside face of the sash or on the top of the sliding door panel: a manufacturer sticker with a model number, glass code, and manufacture date. Photograph it before you do anything else. If the label is gone, measure the rough opening (framing to framing) and the visible glass, not the outside trim.
On the OEM-versus-aftermarket question, the honest answer is that OEM is worth it for glass and sash assemblies where profile tolerances are tight, and a quality aftermarket equivalent is fine for rollers, weatherstripping, locks, and sweeps. Aftermarket rollers from a reputable maker cost $12 – $35 each versus $40 – $90 for OEM, and both wear on the same schedule in desert grit. One compatibility gotcha: vinyl Tremron frames expand and contract more than aluminum, so an aftermarket sash sized to the label’s nominal dimension can bind by 1/16 inch in August. We match to the measured opening, not the printed number.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Windows & Doors Is Failing
- Hard to slide or lift. Grit-packed rollers or worn pivots. In Boulder City, wind-blown dust in the track is the leading cause, not part failure.
- Drafts or daylight at the edges. Compressed or dried weatherstripping. UV exposure hardens foam and felt faster here than in cooler climates.
- Fogging between the panes. A failed seal in the insulated glass unit (IGU). The glass itself has to be replaced; the frame may be fine.
- Latch or lock won’t catch. A worn keeper or a frame that has shifted slightly. Often a $20 part, occasionally a sign the rough opening moved.
- Water staining inside the frame. Failed flashing or a cracked sill, which is a water-intrusion problem, not a window problem. Worth inspecting before it reaches drywall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City homes, installed pricing breaks down like this:
- Window replacement: $4,500 – $15,000
- Impact window installation: $8,000 – $25,000
What drives the range: unit count, frame material, whether we’re swapping into existing openings or reframing, and glass rating. Parts and labor are quoted separately and in writing, so you see the roller or sash cost versus the install cost. Every installation carries our 365-Day Done Right Promise: if it fails within a year, we return and correct it at no charge. We also install KraftMaid, Cambria, and Silestone products, and follow the same documented-materials approach on every job.
DIY or Call Us?
You can safely check a window or door yourself: clean the track, test the rollers by lifting the panel a quarter inch and sliding it, and photograph the label. Roller and weatherstripping swaps are within reach for a careful homeowner with the right tools.
Where DIY goes wrong is glass. Removing and resetting an IGU or a full sash on a second-story window means handling 40 – 80 pounds of glass at height, and a dropped pane is a safety event, not a repair. Impact-rated units are heavier still and the anchoring has to meet code. That’s a two-person job with the right equipment. If you’re past cleaning and into replacing, call (844) 797-9259 and we’ll give you a written price before any work starts.
FAQs

How long do Tremron windows and doors last in Boulder City? Expect 15 – 25 years for the frame and 10 – 15 years for rollers, weatherstripping, and IGU seals in this climate. UV and dust shorten the service lives of the soft parts well before the frame gives out.
Can a failing Tremron window or door be repaired instead of replaced? Yes, often. Rollers, locks, sweeps, and weatherstripping are repairable in most cases, and a fogged IGU can be swapped without replacing the frame. Call (844) 797-9259 for a free estimate and we’ll tell you which you actually need.
How long does the swap take? A single window or door is typically a one-day job once the correct part is on site. Multi-unit replacements run two to four days. Lead time for the part is usually the longer half of the schedule.
How do you source the Tremron part? From the model number on your label and measured opening dimensions, through documented manufacturer and distributor channels. We give you the written price for the part and the labor separately before anything is ordered.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












