







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Boulder City Owner’s Guide
We install Unilock-compatible windows and doors for Boulder City homeowners, with most full window replacement projects landing between $4,500 and $15,000 and impact-rated installations between $8,000 and $25,000. Every job starts with a written price before any work begins. Window and door failures rarely announce themselves. You notice a draft along the frame in January, a patio door that drags on its track by summer, condensation trapped between panes, or a sill that has started to pit and chalk after a few desert summers. In Boulder City, that slow decline is the usual way owners find out the glass unit, weatherstripping, or hardware has reached the end of its service life.
Which Unilock Models This Applies To
Window and door hardware and glass units are matched by series, not by brand name alone, so the model line matters more than the label on the frame. Unilock sells windows and doors across several product families, and the same nominal size can use a different sash, balance, or gasket depending on which series the unit came from. The reliable way to identify your part is to read the glass etch in the corner of the pane (a small permanent stamp that carries the manufacturer code and date), then measure the visible glass and the frame opening, not just the rough opening. Pull the manufacturer label from the jamb pocket if it’s still there. For Unilock specifically, the OEM-versus-aftermarket decision usually comes down to three things: gasket and seal profiles that have to match the extrusion exactly, impact-rated glass assemblies that must carry the correct rating for the opening, and whether the original series is still in production. Where OEM parts are unavailable, a quality aftermarket equivalent is often the right call, but only when the profile, rating, and dimensions match. Bradford Remodeling Boulder City is an independent service provider and is not affiliated with Unilock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
Each of these points to a different part, and each is worth acting on before it spreads.
- Drafts or a whistling frame on windy days. The weatherstripping or sweep has flattened and lost its seal. Boulder City’s spring winds find every gap, and a worn seal turns a small leak into a dusty, drafty room fast.
- Fog or condensation between the panes. The insulated glass unit’s seal has failed, letting moisture into the space between panes. Once that happens, the glass assembly needs replacement; no cleaning fixes it.
- A door that drags, sticks, or won’t latch. The rollers, hinges, or strike hardware have worn or shifted out of alignment. Left alone, a dragging door stresses the frame and track.
- Chalking, pitting, or chalky residue on sills and frames. Sun and dry air break down the finish and, on older units, the frame material itself. Our desert climate accelerates this on west- and south-facing openings.
- Cracks, chips, or a soft spot in the glass or frame. Impact damage or water intrusion has compromised the assembly. On an impact-rated unit, any compromise to the glass means the rating is no longer valid until it’s replaced.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Boulder City, window replacement runs $4,500 to $15,000, and impact window installation runs $8,000 to $25,000. The range is driven by how many openings are involved, the size and style of each unit, whether it’s impact-rated, and whether the frame and rough opening are sound enough to reuse. A single door swap sits at the lower end; a whole-house window package with impact glass sits at the top. We break the written price into parts and labor so you can see exactly what the glass assembly, hardware, and installation each cost. All completed work carries the 365-Day Done Right Promise: if the installation fails within a year, we come back and correct it at no charge. We work with KraftMaid, Cambria, and Silestone on interior finishes and can coordinate window and door work with a larger project.
DIY or Call Us?
There’s a safe middle ground. You can read the glass etch, measure the opening, check that the label is still on the jamb, and test whether a draft is coming from the seal or the glass. That information helps us match the right part fast. Where DIY goes wrong is in the assembly itself: replacing an insulated glass unit, re-setting an impact-rated window, or rebuilding door hardware on a heavy unit can leave the opening unsealed, compromise the rating, or damage the frame. An improperly seated impact window is a real safety concern in this climate, and a door that’s off its track can fail under load. Those are the calls we’d rather make for you. Call (844) 797-9259 and a live person picks up around the clock.
FAQs

Expect 15 to 25 years from the window and door assemblies, with insulated glass units frequently failing before the frame does because the seal gives out first. In our desert climate, sun exposure and dry air shorten the life of seals and finishes on west- and south-facing openings, so those units often need attention sooner. Call (844) 797-9259 for an exact quote, and the estimate is free.
Sometimes, yes. Weatherstripping, sweeps, rollers, and some hinges can be replaced on their own, which is the cheaper route when the glass and frame are sound. But a failed insulated glass unit can’t be repaired; the moisture is already inside the sealed space, so the glass assembly has to be replaced. We’ll tell you which one you’re facing after we look at it.
A single window or door typically takes a few hours, and a full window package takes one to three days depending on the number of openings and whether the rough opening needs work. We confirm the schedule in the written scope before work starts, so there are no surprises about timing or price.
We identify the part by the glass etch code, the series, and the measured opening, then match it against the OEM spec or a quality equivalent that fits the same profile and rating. Nothing gets ordered until the measurements and rating are confirmed against manufacturer specifications, so the part that shows up is the part that fits.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












