







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Driveway & Pavers: The Boulder City Owner’s Guide
If your ViewLux driveway or paver surface has cracked, settled, or started shedding material, we install and repair ViewLux-compatible driveway and paver systems in Boulder City, with paver driveway installation running $7,000 to $18,000 and repairs priced after a free on-site look. We’re an independent service provider, not affiliated with ViewLux, so we match the right part or system to your model without steering you toward anything you don’t need. Most Boulder City owners discover the problem the same way: a hairline crack that spreads after one summer, a paver edge that lifts when the sprinkler runs, or joints that stop holding sand within a season.
Which ViewLux Models This Applies To

ViewLux runs its hardscape line across a few product families, and the part you need depends on which one you have. The model tag or engraving is usually on the underside of a loose paver, inside the edge restraint channel, or on the original install paperwork. If you don’t have papers, measure the paver face – length, width, and full thickness – because nominal sizes and actual sizes differ by fractions that matter at the joint line. A 60mm paver and an 80mm paver look nearly identical at the surface but don’t swap cleanly.
Here’s where the OEM-versus-aftermarket call gets real with ViewLux. Their proprietary edge restraints and some interlocking profiles don’t have a direct aftermarket equivalent, so a generic substitute will fit poorly and fail early. Base course, joint sand, and standard-format pavers do have quality aftermarket equivalents at lower cost, and we’ll tell you which is which. The written price we give you breaks out parts and labor line by line, so you can see exactly where the money goes before any work starts. We also work with KraftMaid, Cambria, and Silestone on the interior side when a hardscape project turns into a bigger remodel.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ViewLux Driveway & Pavers Is Failing
- Hairline cracks spreading across paver faces. Thermal cycling in Boulder City’s desert swings – hot days, cool nights, and hard summer sun – stresses the surface until small fractures open. Once water gets in, freeze-thaw and salt exposure widen them.
- Sunken or heaved sections. That’s almost always a base failure, not a paver failure. The substrate under the ViewLux surface has shifted, and re-laying pavers over bad base just repeats the problem.
- Joint sand washing out season after season. Poor drainage or missing edge restraint lets water channel through the joints. In Boulder City, irrigation overspray accelerates this noticeably.
- Loose edge pavers or a separating restraint. The edge channel has failed or was never set deep enough. This one gets worse fast because every tire that clips the edge loosens it further.
- Color fading or surface scaling. Efflorescence and UV fade on lower-grade pavers show up within a few years. Scaling means the paver itself is breaking down, not just dirty.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Boulder City, here’s what the work actually runs:
- Paver driveway installation: $7,000 – $18,000
- Driveway replacement: $5,000 – $14,000
- Driveway sealing: $250 – $700
- Paver patio installation: $3,500 – $11,000
The range depends on square footage, how much base has to be rebuilt, whether the edge restraint is reusable, and paver grade. A reseal is a few hundred dollars; a full re-base and re-lay sits at the top. Every job gets a written price before work starts – parts, labor, and disposal itemized – with no numbers that move at the door. All completed work carries the 365-Day Done Right Promise: if the installation fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: photograph and measure the failing pavers, note whether the problem is surface-only or a sunken section, and check that your downspouts and sprinklers aren’t dumping water onto the drive. What you shouldn’t take on is base excavation, re-compaction, or resetting an edge restraint. Getting the substrate wrong is the single most common reason a paver driveway fails again within two seasons, and it’s the part that’s hardest to see once the surface is back down. A surface seal is a reasonable weekend project. A structural repair isn’t. Call (844) 797-9259 and we’ll tell you honestly which one you’re looking at.
FAQs

A properly installed ViewLux paver driveway typically holds 20 to 30 years in this climate, but the base and edge restraint determine that far more than the paver face does. Our technicians have up to 22 years of experience reading exactly that kind of failure. Call (844) 797-9259 for an exact assessment.
Often yes – localized re-laying and re-sealing is common when the base is sound and the failure is surface-level. If the base has settled across a large area, a partial repair won’t hold. Call (844) 797-9259 for a free estimate and a straight answer.
A small repair is usually a one-day job; a full driveway re-lay runs several days depending on square footage and base work. Call (844) 797-9259 and we’ll give you a written timeline before we start.
We match by model tag, measured dimensions, and profile, then confirm whether a documented OEM or a quality equivalent is the correct fit. Every part is specified in writing before the order goes in. Call (844) 797-9259 for your free estimate.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












