







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Boulder City Owner’s Guide
We install and replace Wellborn-compatible driveway and paver systems in Boulder City, and most full paver driveways here land between $7,000 and $18,000 installed, depending on square footage, base depth, and whether the old surface has to come out. We quote every job in writing before work begins. When we bring in a crew on a planned driveway or paver replacement, you’ll get a firm start date, not a window.
Owners usually find out something is wrong the same way: a hairline crack spreads across a paver course after a hard freeze, a section of the drive heaves and rocks underfoot, or the joint sand washes out every time the spring runoff comes down from the McCullough Range foothills. By the time the rocking starts, the base has usually already moved. That’s the point where patching stops being a real fix and you start pricing a replacement.
We’re an independent service provider. We work with Wellborn-spec materials and compatible pavers, but we are not affiliated with Wellborn.
Which Wellborn Models This Applies To

Wellborn hardscape and driveway components follow the same compatibility logic as the rest of the Wellborn line: the part has to match the series, not just the brand name. The fastest way to identify what you have is to measure, not to eyeball. Most Wellborn driveway and paver failures we see in Boulder City trace back to a homeowner ordering what looked right on a photo instead of measuring the actual course width, thickness, and color lot on the existing surface. Color lots matter more than people expect. A batch poured or pressed a year later will read slightly different in desert sun, and once it’s set in a Boulder City drive, that difference shows up in every afternoon light.
Write down three things before you call anyone: the paver or slab dimensions to the nearest eighth of an inch, the color name if it’s stamped on the underside or the delivery paperwork, and the manufacturer series if you can find it on a box label from the original install. That’s what a supplier needs to pull the right match.
On the OEM versus aftermarket question, we’ll give it to you straight. For color-critical work like a visible driveway apron or a front walk, the OEM Wellborn match is usually worth it. For structural base material, joint sand, and edge restraint, a quality aftermarket equivalent performs the same and costs less. We’ll tell you which is which on your quote, line by line, so you can see where the money is going.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
Five things we see in Boulder City, and what each one actually means:
- Hairline cracks running along the joints. In a paver or slab system, this usually means the base layer compacted unevenly or the joint sand has washed out and left the courses unsupported. The crack is the symptom, not the problem.
- Heaving or rocking sections underfoot. You’ll notice it at the apron or where the drive meets the garage. Water has gotten under the surface and frozen, pushing the base up and the pavers out of level.
- Sunken or settling areas near the edges. This almost always traces to a shallow base. If the original install skipped depth to save a day, Settlement shows up after a couple of wet winters, not before.
- Loose or missing joint sand after a hard freeze. Desert freeze-thaw cycles pull moisture into the joints, and once that moisture expands, it flushes the sand out. If you’re re-sanding every spring, the drainage is the real issue.
- Weed growth through the surface and standing water after rain. Both point to lost joint integrity and a slope that’s no longer shedding water away from the house. That matters because water that sits against a foundation is a much bigger problem than a rough-looking drive.
Color fading on its own isn’t failure. Desert sun eats pigment faster than most people expect, and a surface that’s chalky but flat and solid usually just needs cleaning, not replacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what driveway and paver work runs in Boulder City, and we quote every one of these in writing before work starts:
| Work | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What moves the number: square footage first, then base depth. A proper Boulder City paver install needs a compacted aggregate base deep enough to hold through freeze-thaw, and cutting that depth is where cheap bids hide their number. Removal and disposal of the old surface, edge restraint, and drainage corrections add cost too.
Every line on your quote is broken out: materials, labor, removal, and disposal. The price doesn’t move at the door. When we finish, you get a clean site, a written scope, and a signed guarantee. That guarantee is the 365-Day Done Right Promise: if the work doesn’t hold within a full year, we come back and correct it at no charge to you.
DIY or Call Us?
You can safely check a few things yourself. Walk the drive and note where it rocks or dips. Hose it down and watch where water pools. Look for joint sand washing out at the low corner. Those observations help us quote accurately and they’ll tell you whether you’re looking at a quick fix or a replacement.
Where DIY goes wrong is the part under the surface. Pulling pavers to fix a rocking section without correcting the base just resets the failure clock. Adding sand to joints that have lost their slope traps water where you don’t want it. And a paver drive carries real load, so a base that’s under-compacted cracks and heaves within a season or two in Boulder City’s freeze-thaw swings. For anything below the surface, get it done right by someone who’ll guarantee it in writing. Call (844) 797-9259 for a free estimate.
FAQs

A well-installed paver drive here should hold 20 to 30 years before the surface itself needs replacing, with re-sanding every few years. The variable is the base, not the paver. A drive installed with proper compacted depth outlasts the cheap version by a decade or more. Call (844) 797-9259 and we’ll walk your drive and tell you where yours stands.
Sometimes, yes. A single settled section or a localized crack can often be lifted, re-based, and re-set for a fraction of a full replacement, as long as the surrounding base is sound. Once you have heaving across multiple courses or water pooling against the foundation, repair becomes a patch on a bigger problem. Call (844) 797-9259 for a free look and an honest answer on which one you’re facing.
Most residential paver driveways in Boulder City run three to five working days from demo to final compaction and sanding, weather permitting. A sealing job is one day. We’ll give you the actual schedule on your written quote. Call (844) 797-9259 to schedule your free estimate.
We order to your measured dimensions and color lot, not a guess from a photo, and we source through suppliers who carry the Wellborn line and documented equivalents. That means the material on your quote is the material that shows up. Every install is backed by the 365-Day Done Right Promise, with a free return visit if the work doesn’t hold within a year. Call (844) 797-9259 for a free estimate.
We’re part of the Garrison Partners family, independently owned and operated under The Garrison Standard, and we also work with KraftMaid, Cambria, and Silestone on the interior side. Every job gets a written price before any work begins, and a live person answers the phone 24/7.
Written by the team at Bradford Remodeling Boulder City, serving Boulder City and nearby areas.












